hg0088com网址

www.hg0523.com Buttons can be made by themselves, ten times more beautiful than buying! (With tutorial)

Buttons can be made by themselves, ten times more beautiful than buying! (With tutorial)

Source: Time: 2020-02-21 02:42:54

Millennium Tongzhou vitality north stream

There are many colorful buckles on the market
Buckle
Various materials such as cloth or leather art
A button made of
But the use of such buttons is not high
Not all clothes can be used
Moreover, the style is single
May not match with clothes
If you make your own unique buttons
Can reach a good usage rate
Old clothes can pass
Change the way of changing buttons directly
You can pin a few on your hat and bag
The effect is quite good
Or made into a headdress and pendant.
More practical than you think
Three-dimensional embroidery bag buckle DIY
The production of the buckle is very simple. If you want to embroider the buckle yourself, you just need to take out a small piece of rag or the remaining embroidery thread, embroider the pattern, and then wrap the buckle blank. The small bag buckle is finished.
Here I will show you the embroidery tutorial of the curling rose
Through various embroidery stitching methods, different three-dimensional patterns can be embroidered to make buckles. Larger buckle blanks can also be used to make headwear.
Let ’s learn another rose embroidery tutorial,
This embroidery method is very easy to learn!
The material of the button buckle blank has an aluminum bottom or a plastic bottom. Here we will introduce the practice of the aluminum bottom buckle button blank.
The following is referred to as the button buckle blank
First prepare an aluminum bottom buckle blank (the material can be bought online). A mold (composed of upper and lower lids) for pressing the buckle. Ruler, rags, scissors.
The button blank consists of an upper cover and a lower cover. Use a ruler to measure the diameter of the upper cover of the button blank. For example, if you measure 2.5CM, cut a piece of rag or embroidery with a diameter of about 5CM and embroider the pattern.
Place the cut rags in the upper lid of the mold.
Then put the top cover of the button blank to press the cloth in.
After pressing in, put the cloth in.
Put the lower cover of the button blank.
Put the lower cover of the mold in and press firmly.
After pressing it, remove the buckle and a small buckle will be ready.
Look at the diagram again
According to the above method, buckle blanks of different sizes can be selected for production.
As long as you can use a few stitches and embroider a few flowers, you will have different buckles. If you can't embroider, you can use rags directly, and the materials can be customized. There are no buttons on the clothes, you can find a similar color to make a nail.
It's hard to make a tiara without beauty.
Take a look at the various acupuncture tutorials
Cross stitch bag buckle DIY
In addition to the above embroidery methods, cross stitch can also be easily controlled. If you can't embroider, cross stitch can also be beautiful.
After the introduction of the aluminum bottom buckle is introduced, let me introduce the practice of the plastic bag buckle.
This method is relatively simpler than the aluminum bottom, and does not require die pressing. The upper and lower covers can be pressed together.
Prepare a plastic package button blank, still measure the diameter, and then cut out a cloth that is twice the diameter, you can embroider a cross-stitch pattern or various three-dimensional patterns.
First sew around the cut cloth with a needle thread.
Cover the button blank, pull the thread, and the top cover shrinks.
Go back to the front and correct the embroidered pattern.
After correcting, return to the bottom and cut off the thread.
Put the lower cover on the center of the T-shaped part of the upper cover, press it, and the plastic buckle is finished.
Is not it simple?
Various cross-stitch embroidery patterns can be referenced. The smaller the buckle, the simpler the pattern can be embroidered.
Pendant DIY
Made into a pendant full of fashion sense!
How to make a pendant necklace
Prepare a pendant. You can also remove the old gemstone. A piece of embroidered cloth, needlework, hot melt adhesive
Press the pendant on the cardboard to print the inner diameter of the pendant.
Cut out the printed oval cardboard and put on an embroidered cloth.
Needlework shrinks.
The cross line is tightened.
Then coat the bottom with hot-melt glue and stick it to the pendant.
how about it? Would you like to try it?
There are still so many ways to use buttons. Quickly use your family's threads and rags!

Spider pond