www.99hg6..com Tilapia fishing tips for more than ten years

Tilapia fishing tips for more than ten years

Source: Time: 2020-01-09 06:47:51

Millennium Tongzhou vitality north stream

Tilapia is mainly distributed in Guangdong, Guangxi, Fujian, and Hainan. Tilapia can be seen in ponds, reservoirs, rivers and other waters. Therefore, tilapia has become the favorite fishing target of southern fishing enthusiasts. Fish one. In recent years, in order to meet the needs of the majority of fishing enthusiasts, whether it is a reservoir or a sports pond, tilapia is continuously put in from March to October every year, and it is mainly tilapia with a single tail of more than 3 kg.
However, as tilapia is fierce by nature and has an instantaneous explosive power, it is not easy to become a master of big tilapia fishing. However, known as the "non-king" Li Yilin, based on more than ten years of tilapia fishing experience, summarized a set of "secrets" for fishing big tilapia from five aspects. "Non-king" is here to share with you, hoping to help some beginners of big tilapia fishing.
Fishing time, slightly different between seasons
In terms of fishing in the southern region, early spring or late autumn and early winter should choose fishing in the morning after the sun comes out. The best time is 9 am to 5 pm. Try to choose deep-sea fishing for tilapia.
In late spring, summer, and early autumn, you can fish from morning to night, and you don't need to fish in deep pools. In the summer, when tilapia is ready to get dark, there is a peak time for fish, so you must grasp the time. In addition, tilapia breed in the shallow water of fish ponds from the end of April to early June each year. At this time, they can also be caught on the shore, but non-formal tilapia fishing is not recommended.
Ingredients beat nests, sharpen the chopped wood
Tilapia bait is generally the most common frozen material. The frozen material is divided into liver flavor, fishy flavor and red tail green (shrimp and the like). The three types can be mixed and used. There is also the use of granules to add sticky powder and raw sugar granules. Since frozen materials are suitable for most fishing grounds, and the effect is best for tilapia fishing, we focus on the method and use of frozen materials here.
When you go to the fish pond, first thaw the frozen material (requires freshness), then use a liver and a fishy smell (large mouth is not good liver taste, sharp mouth is not good fishy taste) and add half a bag of red tail green, rub repeatedly, and fully bait Mixed together. If the bait is too hard, add a small amount of pond water, and the bait must be as soft as an ear lobe. In terms of taste type, you can choose the fresh and fruity taste for fishing new fish, and the old fish and old fish smell can be partial acid smell. After the bait is opened, put a little on the bait tray, and put the rest in the fishing box to maintain the state and taste.
In terms of litter, duck feed, chicken feed, special tilapia pellets, and tilapia powder bait are commonly used as nests. However, making nests is not easy and must be based on order. One is to sprinkle particles. After selecting the position and using the rod, first adjust the drift (the drift will be described later), and then hook the lead skin under the hook. Lead skin should not be too heavy. After hanging the lead skin, the floating and sinking speed is slow, but it must be pulled down when it is launched. After the float is erected on the surface of the water, the fishing rod is fixed, and then the float is sprayed with particles. Try to spread about 30 centimeters behind the float, and in the last few times, force the particles into the air to expand the range of attracting fish, with the float as the center diameter of 10 square meters, but not more particles.
The second is littering. The granules and tilapia powder bait are mixed with water, but the requirements are high, neither too loose, nor too hard, nor too wet. The best effect is to ensure that the fishing point can be smoothly drawn on the lead, and it can not be spread out after entering the water or just spread out. Be sure to remove the hooks when drawing the nest, and the nest should not be too large. It is advisable to use large eggs. The nesting point is 10 cm after the float is erected. When many fishermen pull the nest, the amplitude is too large, and the nesting material is drawn in front of the fishing point. This is a taboo and it is equivalent to blocking the fish outside.
There are two steps to complete the litter, and the size of the litter can be determined according to your preference. However, the first nest is calculated based on dry material (fish bait mixed with water), and at least two to three pounds of nest material must be placed. In the fishing process, no matter whether there are fish or not, it is necessary to smoke two or three eggs in the nest for half an hour, because it is difficult for the fish to eat as long as it enters the fishing spot.
Selection of fishing gear, model selection
The tilapia fishing tools are also the most sophisticated, and you can't catch them by simply assembling a rod. For fishing rods, use 3.6 m or 4.5 m fishing rods. Among them, the number of 3.6 meters is a rigid rod of 4-6, and the number of 4.5 meters is a rigid rod of 3-5. The big tilapia was very explosive immediately after being stabbed. The above numbers can control the sprint course of the fish with the bar, and it also has the characteristics of relative protection.
Line groups and hooks are required to be more delicate. The main line is a 1.5 or 2 main line. The main line is slightly longer than the pole by about 5-10 cm. It is required not to exceed the standard and not to extend. Use a quick pin at the bottom of the main line.
The strands should be folded in half of 0.8 / 1.0 / 1.2 / 1.5 with a length of 60 cm. The strands can be carbon or ordinary strands. Stronger toughness is required. The strands have rubber rings. Hooks can be used with 9 or 10 sleeve hooks. Hook handles are long and not easy to straighten. The hook distance is 1.5 hook distances.
In terms of floating, you can choose reed floating, and the total length must be more than 35 cm. The commonly used floating body is slightly wider shoulders, long water droplets, floating tail, floating body, and floating foot length.
There are also dip nets and pole frames. Using a 1.5-foot caliber net, it is convenient to fish in one time.
The pole frame must use a short pole frame, which can reduce the contact between the pole frame and the main line when fishing, so that there is a wider space for fishing.
Speed control, more fish and less fish
In most cases, tilapia fishing is carried out with a hook that is 10 cm above the bottom. During the fishing process, the throwing point must be accurate. Each time the 3.6-meter rod is thrown, the error of the floating position cannot exceed 5 cm, and the error of the 4.5-meter rod cannot exceed 10 cm.
If there is no movement in the float, it is proved that there is no fish nearby, the frequency of throwing the rod should be fast, and the rod should be changed for bait half a minute after the end of the bait. If the float is moving, but the movement is slow, don't rush to catch the fish, you should use "fish to attract fish". After the float floats to the end, there will be action or the off-bottom interface soon, you need to catch it slowly and keep the fish at a uniform speed. To put it simply, fishing is faster when there is no fish or less fish, and slower when there is more fish. Don't forget to fill the nest when there are many fish. To fill up more diligently, it is best to fill the nest once after catching one or two.
Tilapia eating bait must be paid attention to the most standard movement on the float. The top of the tilapia has a strong setback, and the tilapia eats differently from the catfish and grass carp. They have a complex mouth. Especially when they don't like bait, there will be a lot of chaotic movements. When you encounter it, you ca n’t lift the stab fish, it is easy to hook the body or the hook is too thin, but it will cause the running fish to mess up the nest. Be sure to wait until the most solid and solid before lifting the rod. As long as the fish enters the nest, it will not go easily without disturbing it.
Remember, don't lift the stabfish without full confidence. Judging the condition of the fish in the nest through floating action to maintain a good rhythm, this is a very important part of fishing for tilapia.
Stingrays copy fish, angular speed is indispensable
Tilapia's mouth is stiff, and when it finds a constant twitch in the float, it needs to stab the fish quickly. But the range cannot be too large, it must be short and powerful.
Tilapia is generally unresponsive for about a second after the hook is caught by the fish. To grasp this precious one second, raise the pole up to an angle of 60 degrees as soon as possible, and the fish will soon emerge from the water. However, when you are out of the water, don't let the fish sink easily anymore, and bring it from the bottom of the water to the surface and then into the dip net in front of you.
A five-pound tilapia is not difficult to copy into the net for a few seconds. If the fish is not lifted quickly after being stabbed, it will be difficult to pull it back once it has been given a chance. If the fishing rod is not stiff enough, you cannot immediately lift the fish out of the water surface or go down again. At this time, you must use a soft force to control the angle of the rod to be not less than 60 degrees. "Pick fish" try to grasp the tilapia while lying flat on the water and bring the fish into the net. Maintaining a steady mentality throughout the operation is the key to not running fish.
Non-kingdom epilogue
It is not difficult to catch big tilapia. Configure reasonable tools, nests, and bait, choose a fishing time, master the fishing rhythm, and do a series of actions after the fish, you can have a good harvest.

Spider pond