hg0088com网址

www.hg3385.com Light curtain sensor wiring instructions

Light curtain sensor wiring instructions

Source: Time: 2020-02-21 02:35:16

Millennium Tongzhou vitality north stream

Wiring instructions:
1. The safety light curtain controller self-checks through the relay contacts.
2, 220v AC power access controller.
3, two relay outputs out, as the controller signal output.
4. The light curtain outputs os1 and os2 are connected to the black and white wires of the light curtain receiver, respectively.
5. The contact self-test EDM is connected to the light curtain receiver through the green wire.
6. The receiver power is 24vdc connected to the controller through the brown wire, and 0v negative pole is connected to the controller through the blue wire.
7. The light curtain transmitter is connected to the light curtain self-test TEST switch point of the controller by the yellow wire.
8. The positive 24Vdc voltage of the light curtain transmitter is connected by the brown wire, and 0VdC is connected by the blue wire.
Sensor wiring

Spider pond